Skytech Smart Stat IV Heat-n-Glo Fireplace Thermostat Timer Remote Control
This user friendly, remote can be operated manually from the transmitter (handheld remote) or thermostatically using the transmitter. The transmitter has four buttons; on, off, mode, and set. Turn the fireplace on and off manually, or you can set the temperature for the room by turning on the thermostat setting and selecting the temperature you wish. The timer can be set in fifteen minute increments, up to 9 hours. Available countdown times are 15 min, 30 min, 45 min, and 1 hour to 9 hours (alternating every 30 mins.) The LCD screen displays the room and thermostat temperature in F or C. This system operates on radio frequencies within a 20 range using non-directions signals. In order to operate this remote, you must have a junction box that is in working condition under your fireplace. If you have a junction box under your unit, we recommend making sure you have active power before making your purchase. When plugged into a standard 110-120 VAC receptacle, the remote receiver operates on commands from the transmitter or from the slide switch on the face of the receiver (This switch is to be used during a power outage to operate the appliance manually).